CETONI devices are connected to one another via CAN bus and use the CANopen protocol for standardized access to all device parameters. The PLC controls from Beckhoff, B&R or WAGO already have CANopen interfaces for direct connection of our devices or can be expanded to include CANopen capabilities using bus couplers.

The Nemesys Firmware Specification gives you detailed information about accessing the device parameters via CANopen and controlling the pump with your Beckhoff or WAGO PLC.

In the Nemesys Integration Kit, we have bundled all the important documents and instructions for integrating the Nemesys pumps in one package. In the kit you will find, among other things, the firmware specifications of the pumps and the open source RS232 library.

In the kit you get

• Detailed firmware documentation and documentation of the CAN and RS232 communication
• Open source RS232 C library

With the appropriate adapter cable, you can easily connect your CETONI devices to the CAN bus of your control system. You can feed the 24V needed for the supply of the CETONI devices via the two cable strands.