Skip to main content

DAQ plugin

Detection with increased sampling frequency

Do you want to record analog values with a higher sampling frequency? The DAQ plug-in gives you the opportunity to do so. With the powerful tool, droplets can be optimally detected and measured, for example.

The DAQ plug-in supports the multifunction I/O devices of the USB-600x series from National Instruments. The NI USB-6002 in connection with the DAQ plug-in, lets you capture data from up to 8 channels simultaneously, with a sample rate of up to 6.2 KHz per channel.

Easy connection thanks to USB

Connectivity and configuration

The USB-6000 is simply connected to the PC via USB and has 8 analog inputs with a resolution of 12 bit. In addition, there are 4 digital inputs and 4 digital outputs. To use the USB-6000 in the CETONI Elements software, you just have to set it up in the device configurator.

Quick and easy: record and process measured values

Measure, trigger functions and control devices

Quickly and easily configure which analog and digital channels are to be recorded and which sample rate is used for recording. All analog and digital channels of the USB-6000 are available in the software as I/O channels and can therefore be used in script programs to trigger functions or to control other devices (e.g. pump flow rate).

The measured values of all configured channels are recorded and displayed in real time. At the same time, the measured values are recorded in a CSV file and can therefore be imported and evaluated by external tools.